Subcribe to our email newsletter

Hitecnico 110W LED Canopy IP66 to Replace 300W MH in Filling Station Lighting

  • Posted on:  Monday, 28 March 2016 08:41

Hitecnico 110W LED Canopy IP66 available for both Recessed Mounted and Surface Mounted, good for Filling Station Lighting, Gas Station Lighting, Petrol Station Lighting, etc.

Hitecnico 110W LED Canopy is equipped with world top level Philips Lumileds LUXEON mid-power chip and Mean Well LED power supply, good for IP66, with 5 years warranty. IES files are available for lighting design.

The typical 110W model with 14300 lm can be good to replace the conventional 300W MH lamps. Besides the 110W, there are also 150W, 75W available from us.

Hitecnico 110W LED Canopy IP66 Surface Mounted

Hitecnico 110W LED Canopy Light Surface Mounted shown as above image.

Hitecnico 110W LED Canopy IP66 Recessed Mounted

Hitecnico 110W LED Canopy Light Recessed Mounted shown as above image.

Remarks: The film is to protect PC cover, and should be removed after installation.

Hitecnico 110W LED Canopy IP66 Recessed Mounted Backside

Hitecnico 110W LED Canopy Light Recessed Mounted backside view.

TECHNICAL DATA:

Power: 110W

Luminous Flux: 14300 lm

LED Chip: Philips Lumileds LUXEON mid power

Power Supply: Mean Well HLG series LED driver

Input Voltage: 90-305Vac; 50/60Hz (Optional: 277-528Vac)

LED Efficiency: 152Lm/W

Lamp Efficiency: 130Lm/W

IP Rating: good for IP66

Power Factor: 0.95

CRI: Ra 70 (Optional: Ra 80)

CCT: 5700K (Optional: 3000K, 4000K, 5000K, 6500K)

Warranty: 5 years for the complete 110W LED Canopy

Beam Angle: 120 degree

Housing Color: White (Please check with us for other color options)

IES files: Available

Application: Filling Station Lighting, Gas Station Lighting, Petrol Station Lighting, etc.

Leave a comment

Make sure you enter the (*) required information where indicated. HTML code is not allowed.